If your clients run virtual machines, you have three ways to protect them with WholesaleBackup: install the backup client inside each VM and back up its files, back up whole Hyper-V VMs from the host through Microsoft VSS, or have a VMware (or other) host write its own VM backups and send those offsite. Each one restores differently, so the right choice depends on what you need back after a bad day: a few folders, or the whole machine.

This guide walks through all three, the trade-offs our own documentation spells out, and the other direction too: turning a backed-up physical machine into a VM you can mount or run in Amazon EC2.

The Short Answer: Three Ways to Protect a VM

1. Client inside the VM

  • Works with: any hypervisor (Windows or macOS guest)
  • You back up: the VM’s important files and folders, like a physical machine
  • You get back: granular file and folder restores, not a full VM rebuild

2. Client on the Hyper-V host

  • Works with: Hyper-V
  • You back up: whole VMs (.VHDX and config files) through the Hyper-V VSS writer
  • You get back: the full VM files, which you mount on the host or as a virtual drive

3. Host-made backups

  • Works with: VMware and other hosts that aren’t VSS aware
  • You back up: the backup files your hypervisor already creates on a schedule
  • You get back: whatever your hypervisor’s own backup format restores

On important servers you can combine the first two: whole-VM copies for a rebuild, plus an in-guest client for quick file restores.

How Do I Back Up the Files Inside a VM?

Install the WholesaleBackup client in the VM and treat it exactly like a physical computer. Pick the folders, databases and mailboxes that matter, set a schedule, and it backs up to whichever storage you chose for that client.

This works on every hypervisor because the client never touches the host. The catch is just as simple: you’re protecting the data in the VM, not the VM itself. If the VM is corrupted, you can’t boot a copy of it from this backup.

You can still get every file back. Install the client on any other computer or VM, sign in with the same backup account, open the Restore tab, click Refresh, and pick the original machine’s Computer@Domain name from the list. Everything it backed up is there to restore.

How Do I Back Up Whole Hyper-V VMs?

For whole Hyper-V VMs, install the client on the Hyper-V host. WholesaleBackup uses Microsoft’s Volume Shadow Copy Service (VSS) and the Hyper-V VSS writer to get a consistent copy of each VM’s files.

In the client, go to Backup > Selections, then Computer > VSS System Components. Load the list of VSS writers and select the Hyper-V VSS Writer. That backs up every VM on the host.

Back Up Only Some of the VMs

You don’t have to take them all. Instead of ticking the writer, expand it like a folder. You’ll see every file the Hyper-V writer wants to back up, and you can pick the .VHDX, .VMRS and .VMCX files for just the VMs you need. That’s handy when a host runs a mix of client production servers and throwaway test boxes.

Plan Around the VSS Freeze

Every time a VSS snapshot is taken on a Hyper-V host, the Hyper-V writer briefly freezes all of the VMs so it can snapshot them. This happens even if Hyper-V isn’t selected in the backup, because VSS asks every writer on the machine to prepare. It’s brief, but it’s real. Schedule host backups for a quiet window, and tell the client before you install on a host that runs latency-sensitive workloads.

Big VHDX Files, Small Daily Uploads

VM disks are large, and older versions of our software had to send a changed .VHDX almost whole every day. The current client runs differential scans on these files with significant deduplication savings, so a VM that changes a little each day uploads a little each day. That’s what makes regular offsite copies of whole VMs practical over a normal internet connection.

Can I Back Up VMware VMs?

Yes, with one rule. VMware doesn’t lock its virtual machine files the way Hyper-V does, so you could point the client at the VM folder. Don’t. You’d be backing up “dirty” or crash-consistent copies taken while the VM is running, and those can fail to restore cleanly.

The safer way is to let the VMware host do what it does well: set up a scheduled backup on the host that writes backup files of the VMs you care about, then select those backup files in WholesaleBackup. The client handles encryption, deduplication and the trip offsite to your storage.

The same approach applies to any other hypervisor that isn’t VSS aware.

How Do I Restore a Backed-Up VM?

It depends on how you backed it up:

  • From a Hyper-V host backup: restore the VM’s full files, then either attach them on the Hyper-V host again or, because a .VHDX is mountable, mount it in Windows as a virtual drive and copy out what you need. There’s no single-file restore straight from the VM image; you restore the image first.
  • From an in-guest backup: restore files and folders as you would for any computer, from the original VM or from another machine using the same backup account.
  • From VMware host backups: restore the backup files, then bring the VM back with your hypervisor’s own restore tools.

Can I Turn a Backed-Up Machine Into a VM?

This is the other half of the virtual story, and it’s newer. WholesaleBackup can back up a whole physical drive as a disk image and stream it offsite with our Rolling Differential algorithm, with no local staging copy. Images are stored as VHDX, so the old 2 TB limit of the VHD format no longer applies; you can back up drives of virtually any size.

A VHDX is a virtual disk, which opens up options a plain file backup can’t:

  • Mount it. Restore the image and mount it in Windows to browse the files.
  • Run it in Amazon EC2. In the client’s Restore tab, the Disk Image to S3 wizard restores the image straight to an Amazon S3 bucket. Pick a bucket in the same region you’ll launch in; you’ll need an AWS access key with S3 permissions plus ec2:ImportSnapshot. From there, AWS’s VM Import/Export turns the image into an AMI you can launch as an EC2 instance. That’s a way to get a client’s failed server running in the cloud while you sort out the hardware.
  • Put it back on hardware. Image-to-Physical Disk restore writes the image to a new drive (at least as large as the image) from the client’s Restore tab. For a full rebuild, bare metal restore starts in the Web Console: open Remote Manager, pick the brand, account, computer and VHDX, and generate a one-time restore code that’s good for 24 hours. Remote restores require multi-factor authentication on your account.

Which Method Should You Use?

  • A few VMs on Hyper-V, need fast full recovery: client on the host, whole VMs via the Hyper-V writer
  • Hyper-V host with mixed VMs: host client, selecting only the VMs that matter
  • VMware or another non-VSS host: host-made VM backups, sent offsite by the client
  • Need quick file restores from a VM: client inside the VM (add it alongside a host backup for key servers)
  • Physical server you may need to run as a VM in a pinch: disk image backup, restore to S3 and launch in EC2

Whatever you choose, it runs through the same Web Console you use for every other device: your brand on the client, your storage, your alerts.

Frequently Asked Questions

Is WholesaleBackup agentless for VMs?

No. Every method installs the client somewhere, either inside the VM or on the host. That’s what lets it encrypt before data leaves the machine and send only changed blocks.

Can I restore a single file from a Hyper-V VM backup?

Not directly from the VM image. Restore the full .VHDX, then mount it and copy the file out. If you want one-click file restores, also run the client inside that VM.

Does backing up a Hyper-V host affect the running VMs?

Briefly. Each VSS snapshot freezes all VMs on the host for a moment, even if Hyper-V isn’t in the backup selection. Schedule host backups for off-hours.

Can I back up VMware VMs directly?

You can select the VM files, but you’d get crash-consistent copies that may not restore cleanly. Have the VMware host create scheduled backups and back those files up instead.

Can I launch a backed-up server in AWS?

Yes. Back up the drive as a disk image, restore it to an S3 bucket with the client’s Disk Image to S3 wizard, then convert it to an AMI and launch it in EC2 from the AWS console.

Go Deeper

Step-by-step guides in the WholesaleBackup knowledge base:

On our site: WholesaleBackup Server · Windows backup client · Image-to-Physical Disk restore · Agentless vs agent-based backup · Pricing

Try it on a real host. Start a free trial, install the client on a test Hyper-V host or VM, and see what a day of VM changes costs in upload and storage. Start your free trial.

About the Author: Ryan Kite

Avatar for Ryan Kite
Ryan Kite is WholesaleBackup's marketing and SEO strategist. He spent seven years as a full-stack engineer on the platform, building the new backup client and modernizing the Backup Ops Web Console, including the Remote Manager partners use to run their clients' backups. He now builds agentic AI systems for search and writes here about running backup as a business.

Want to Start an Online Backup Business?

🔒 See the Full How-To Guide for Online Backup Success

How Can We Help?

The team at WholesaleBackup is happy to listen and share their backup & recovery expertise spanning over 20 years of business-class backup software solutions for resellers, MSPs, and IT Pros. If you are ready to begin building a more profitable and reliable backup service you’re in the right place.

  • Learn how to get started with labeling & deploying your own backup service
  • See how to schedule, run backups, and restore data
  • Understand how to remotely manage and monitor end-user’s backups
  • Get any questions you have addressed

Take a minute to fill out the form and we’ll follow up with you about your request. For a quicker response start a conversation in the chat.

Label & Launch Your Backup Software in 5 Mins

Start your all-inclusive, no-risk, free trial today

REGISTER

See What Our Partners Are Saying About Us

cloud9 wholesalebackup partner

I am very impressed with the level of customer care and communication you have put forth into making sure that our setup with you guys goes smoothly.  It is rare nowadays to find vendors that take pride in their products as well as show concern for a client’s well-being.

Glen Rostant, President Cloud 9 Solutions, Inc.
vanguard bulldog technologies

We were able to quickly restore our clients data without any issues using their last good backup – saving them from total data loss and stopping their business!

Joe Massa - IT Administrator, BullDog Technologies (Vanguard Systems)
Managed IT Solutions (for Dentists)

After using another white-label cloud backup solution for years, switching to WholesaleBackup has been a lifesaver. MUCH less maintenance, cost, bandwidth, and the U.S. based support is the stellar.  The software and interface is SO much simpler and easy to use.   I would recommend WholesaleBackup to any MSP looking to streamline their cloud backup system.

Beau Odom - COO, PCSI Managed IT Solutions
Manage Pointe Technologies

After trying multiple name brand backup vendors, we finally Partnered with WholesaleBackup and couldn’t be happier with the functionality and cost.

Michael Vaughan - Infrastructure Architect, ManagePointe Technologies, Inc
digitalninjaz - partner

Your response time to any and all my request is far superior to any customer service I’ve ever received my ENTIRE CAREER.

Bao Tran, Digital NinjaZ (Founder)

Get Started Now

Simply Pick a Backup Platform Storage Option

You’ll only pay the raw cost of the data used on the cloud storage platform directly.
We never mark up cloud storage backup costs so you can maximize revenue when pricing your online backup service.

AWS S3

S3 storage option for WholesaleBackup

Wasabi

Wasabi cloud storage option for WholesaleBackup

Backblaze B2

Backblaze cloud storage option for WholesaleBackup

Google Storage

GCS (Google) cloud storage option for WholesaleBackup

Synology C2

Synology cloud storage option for WholesaleBackup

Self-Hosted Windows Server

Self-hosted Windows Server storage option for WholesaleBackup

macOS Platform

Run WholesaleBackup software on the macOS platform